0. INTRODUCTION
To the owner of this manual
This machine is carefully designed and manufactured to give years of dependable service. To do
the better and safer job, read the instructions in this manual. Failure to do so could result in
personal injury or machine damage.
The parts used in this machine are subject to change to improve the quality and capacity of the
machine, and for safety.
Therefore, please understand that the contents, photos and illustrations in the manual may differ
from your machine.
MAINTENANCE
When the machine is in abnormal condition, take the remedies. If the machine is still abnormal, ask
Yanmar and give the following information:
Machine model
Serial number
Detailed description of abnormal condition
SUPPLY PERIOD FOR MAINTENANCE PARTS
The period during which we supply maintenance parts for this machine is 9 years after we discontinue
production of this machine.
The supply of maintenance parts will, in principle, terminate at the end of the supply period stated
above. However, even after the supply period has terminated, we still consult with you about the
delivery time and the prices for parts still in stock, if required.
IMPROVEMENTS
To improve or upgrade the feature of the machine or for some other reason, parts are sometimes
changed. In this case, parts of this manual may not apply to the machine.
The company has the right to improve or change when it becomes possible and practical to do so
without incurring any obligations to make changes or additions to the equipment sold previously.
NOTE:
(1) All data are subject to alteration without notice.
(2) Some photos, illustrations may not be identical with this machine due to improving or upgrading in
quality, performance or for some other reasons. Some illustrations and photos may show
optional accessories.
(3) Right-hand (R.H.) and left-hand (L.H.) sides of this machine are determined by standing at the
rear of this machine and facing the direction of forward travel.
To Next Page
Loading...
Need help?
General
