YOKOGAWA Daqstation DX2000 User Manual

Measurement Channels and Alarms
3-31
IM 04L42B01-01E
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
Procedure
• ViewingtheCalibrationNotificationScreen
The calibration notification screen only appears over operation screens. It will continue
to appear until you perform calibration (Finish Calibration).
You can close the calibration notification screen by pressing ESC or DISP/ENTER.
 OperationExample
When Notification is set to 1 (DayBfr) and Renotification is set to 8h
Notification screen
display start
Calibration due date
Notification screen
appears
Renotification Renotification Renotification Renotification
00:00 08:00 16:00 00:00 08:00
Notification (DayBfr) setting
Notification screen
appears
Notification screen
appears
Notification screen
appears
Note
• Thecalibrationnotificationscreenwillcloseifyouchangescreenswhileitisdisplayed.
• Ifthecalibrationduedatepassesbeforeyoucompletecalibration,thatinformationwillbe
recorded in the login log (the operation log on DXs with the /AS1 option).
3.13ManagingtheInputCalibrationInterval(/CC1option;releasenumbers4andlater)

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English