YOKOGAWA Daqstation DX2000 User Manual

4-28
IM 04L42B01-01E
4.5 DisplayingVariousInformation
This section explains how to display reports (/M1 and /PM1 options) and how to use the
status display.
For a description of the function, see section 1.3.
Procedure
• ShowingtheDisplay
1.
Press DISP/ENTER to show the display selection menu.
2.
Press the upanddownarrowkeys to select INFORMATION.
3.
Press the rightarrowkey to display the sub menu.
4.
Press the upanddownarrowkeys to select the sub menu item.
To close the menu without changing the displayed contents, press the
ESC
key.
Information display submenu
MODBUS CLIENT: Displays the Modbus
client status
MODBUS MASTER: Displays the Modbus master
status
RELAY: Displays the relay status
REPORT DATA: Displays report data
ALARM SUMMARY: Displays an alarm summary
See section 4.6.
(Not displayed with the default settings. To display, see section 5.18.)
MESSAGE SUMMARY: Displays a message summary
See section 4.7.
MEMORY SUMMARY: Displays a memory summary
See section 4.8.
EVENT SWITCH: Displays the status of the
event level switches
COLUMN BAR: Displays report data using
stacked bar graphs
5.
Press DISP/ENTER.
The display appears.
• DisplayingtheReport
 • SwitchingtheDisplayedReportData
The Index item on the report display shows “the number of the report data being
displayed/the number of report data saved in the internal memory.” The largest
report data number corresponds to the most recent report data.
Number of the report data being displayed
Number of report data saved to the internal memory
Start: Start date/time
(Date/time of
memory start)
Timeup: Report date/time

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English