YOKOGAWA Daqstation DX2000 User Manual

Switching Operation Screens
4-35
IM 04L42B01-01E
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• SavingtheData
Save the data in the internal memory to the CF card or the USB flash memory (/USB1
option).
For a description of the function, see section 1.4.
1.
Press DISP/ENTER to show the display selection menu.
2.
Press the rightarrow key to display the submenu.
3.
Select DATASAVEMODE with the upanddownarrowkeys.
4.
Press DISP/ENTER.
The display switches to DATA SAVE MODE.
5.
To save a specified file, select it with the cursor. This operation is not necessary in
other cases.
Cursor
(move with the arrow keys)
6.
Press DISP/ENTER to show the display selection menu.
7.
Use the upanddownarrowkeys to select SELECTSAVE, ALLSAVE, M.
SAMPLESAVE, or REPORTSAVE.
8.
Press DISP/ENTER.
* If you are using a CF card and a USB flash memory (/USB1 option), the message “Which
media do you want save to?” appears. Select the destination medium using the
arrow
keys
, and press
DISP/ENTER
.
The measured data is saved.
Note
To abort the data saving operation in progress, carry out the procedure below.
Press
FUNC
and press the
SaveStop
soft key.
4.8UsingtheMemorySummary

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English