YOKOGAWA Daqstation DX2000 User Manual

5-17
IM 04L42B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• AlarmMarkIndication
Displays marks indicating the values of the high and low limit alarms, delay high and
low limit alarms, and difference high and low limit alarms. This setting is common with
the bar graph display.
 • Alarmmark>Markkind
Settings Description Mark
Alarm The alarm mark is green under normal conditions. It changes to the
specified alarm color when an alarm occurs (release number 3 or
later; see section 3.7 for details).
or
Fixed Displays a fixed color.
 • Alarmmark>IndicateonScale
To display alarm point marks, select On.
 • Alarmmark>Alarmmarkcolor>Alarm1,Alarm2,Alarm3,andAlarm4
If the Mark kind is set to Fixed, specify the color of the alarm point marks.
If one of the colors underAlarmmarkcolor is set to Auto, its corresponding point
mark will appear in the specified alarm color (release number 3 or later; see section
3.7 for details).
• ColorScaleBand
Displays a specified section of the measurement range using a color band on the
scale. This setting is common with the bar graph display.
 • Colorscaleband>Bandarea
Settings Description
In Displays the area inside using the color band.
Out Displays the area outside using the color band.
Off Disables the function.
 • Colorscaleband>Color
Set the display color.
 • Colorscaleband>Displayposition>LowerandUpper
Specify the display position. Set a value within the span or scale range.
Lower: Lower limit of the area.
Upper: Upper limit of the area.
5.8DisplayingAlarmPointMarksandColorScaleBandontheScale

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English