6-9
IM 04L42B01-01E
Saving and Loading Data
6
The settings that you
made in setting mode
appear here.
Select a text field number, and enter text. However, you cannot specify the Tilte of
field. (Firmware versions numbers 4.11 and later)
Press DISP/ENTER.
The start recording screen will appear.
If you press the +1 and –1 soft keys to increase and decrease the text field
number, any text field numbers whose "Title of field" have not been set will be
skipped. If you press the Input soft key to enter text field numbers directly, any
text field numbers whose Title of field have not been set are also displayed.
The text fields that you specify here will only be saved to the measured data file
whose recording you are starting. The text fields that you set in setting mode (see
page 6-6) will not change.
4.
Move the cursor (blue) to START, and then press DISP/ENTER.
The internal memory icon in the status display section changes from the icon that indicates
that memory sampling is stopped to the icon that indicates that memory sampling has started.
• IfyouarerecordingdisplayoreventdatainFreemode,recordingwillstart.
• Ifyouarerecordingeventdatainatriggermode(SingleorRepeat),theDXwillentera
trigger-wait state.
• StoppingRecording(Memorystop)
1.
Press STOP. A confirmation window opens.
2.
Select Yes, and press DISP/ENTER.
If the DX is equipped with computation functions (/M1 and /PM1 options), select
Mem+Math
or
Memory
and press
DISP/ENTER
.
On DXs with the /AS1 advanced security option, if there are alarms upon which the alarm
ACK operation has not been performed, a confirmation message will appear. Perform the
alarm ACK operation as necessary.
The internal memory icon in the status display section changes to the icon that indicates
that memory sampling is stopped.
6.3UsingtheBatchFunction
To Next Page
Loading...
Need help?
General
