Zebra DS6878 Product Reference Guide

5 - 34 DS6878 Product Reference Guide
Fuzzy 1D Processing
Parameter # 514
This option is enabled by default to optimize decode performance on 1D bar codes, including damaged and
poor quality symbols. Disable this only if you experience time delays when decoding 2D bar codes, or in
detecting a no decode.
Hand-held Decode Aiming Pattern
Parameter # 306
Select Enable Hand-held Decode Aiming Pattern to project the aiming pattern during bar code capture,
Disable Hand-held Decode Aiming Pattern to turn the aiming pattern off, or Enable Hand-held Decode
Aiming Pattern on PDF to project the aiming pattern when the digital scanner detects a 2D bar code.
*Enable Fuzzy 1D Processing
(1)
Disable Fuzzy 1D Processing
(0)
NOTE With Picklist Mode on page 5-28 enabled, the decode aiming pattern flashes even when the hand-held
Decode Aiming Pattern is disabled.
*Enable Hand-held Decode Aiming Pattern
(2)
Disable Hand-held Decode Aiming Pattern
(0)
Enable Hand-held Decode Aiming Pattern on PDF
(3)

Zebra DS6878 Specifications

General

Wavelength	655 nm
Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle	-360 - 360 °
Input voltage	5 V
Bluetooth	Yes
Dimensions (WxDxH)	69 x 97 x 185 mm
Certification	FCC, RoHS
Product color	Black
International Protection (IP) code	IP43
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Cables included	USB

Weight and Dimensions

Weight	238 g