xviii DS6878 Product Reference Guide
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides a product overview, unpacking instructions, and cable connection
information.
•
Chapter 2, Scanning describes parts of the digital scanner, beeper and LED definitions, and how to use
the digital scanner.
•
Chapter 3, Maintenance, Troubleshooting & Technical Specifications provides information on how to care
for the digital scanner and cradle, troubleshooting, and technical specifications.
•
Chapter 4, Radio Communications provides information about the modes of operation and features
available for wireless communication. This chapter also includes programming bar codes to configure
the digital scanner.
•
Chapter 5, User Preferences & Miscellaneous Digital Scanner Options provides programming bar codes
for selecting user preference features for the digital scanner and commonly used bar codes to customize
how the data is transmitted to the host device.
•
Chapter 6, Imaging Preferences provide imaging preference features and programming bar codes for
selecting these items.
•
Chapter 7, USB Interface provides information for setting up the digital scanner and cradle for USB
operation.
•
Chapter 8, RS-232 Interface provides information for setting up the digital scanner and cradle for RS-232
operation.
•
Chapter 9, Keyboard Wedge Interface provides information for setting up the digital scanner and cradle
for Keyboard Wedge operation.
•
Chapter 10, IBM Interface provides all information for setting up the digital scanner and cradle with IBM
468X/469X POS systems.
•
Chapter 11, Wand Emulation Interface provides all information for setting up the digital scanner and
cradle for Wand Emulation operation.
•
Chapter 12, Scanner Emulation Interface provides information for setting up the digital scanner and
cradle for Scanner Emulation operation.
•
Chapter 13, 123Scan2 (PC based scanner configuration tool) enables rapid and easy customized setup
of Zebra scanners.
•
Chapter 14, OCR Programming describes how to set up the digital scanner for OCR programming.
•
Chapter 15, Symbologies describes all symbology features and provides the programming bar codes
necessary for selecting these features for the digital scanner.
•
Chapter 16, Advanced Data Formatting (ADF) describes how to customize scanned data before
transmitting to the host. This chapter also contains the bar codes for advanced data formatting.
•
Chapter 17, Driver’s License Set Up (DS6878-DL) describes how the DS6878-DL digital scanner can
parse out information from the standard US driver’s licenses and certain other American Association of
Motor Vehicle Administrators (AAMVA) compliant ID cards.
•
Appendix A, Standard Default Parameters provides a table of all host devices and miscellaneous digital
scanner defaults.
•
Appendix B, Programming Reference provides a table of AIM code identifiers, ASCII character
conversions, and keyboard maps.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
