Zebra DS6878 Product Reference Guide

OCR Programming 14 - 13
OCR Maximum Characters
Parameter # 690
To select the maximum number of OCR characters (including spaces) per line to decode, scan the following
bar code, then scan a three-digit number between 003 and 100 using the numeric keypad in Chapter 16,
Advanced Data Formatting represents the number of OCR characters to decode. Strings of OCR characters
greater than the maximum are ignored. The default is 100.
OCR Security Level
Parameter # 554
To select the OCR decoding security/confidence level, scan the following bar code, then scan a two-digit
number using the numeric keypad in Chapter 16, Advanced Data Formatting represents the level of
confidence. Greater numbers minimize OCR decoding errors but reduce performance. Setting a value that is
too high can result in failure to decode. Setting a value that is too low can cause decoding errors. The range of
the security level is 10 - 90 and the default is 80.
OCR Maximum Characters
OCR Security Level

Zebra DS6878 Specifications

General

Wavelength	655 nm
Scanner type	2D
Yaw reading angle	-60 - 60 °
Decoding standards	1D, 2D, PDF417, PDF417, microPDF417, Composite Codes (CC-A, CC-B, CC-C), U.S. Postnet and Planet, U.K., Japan, Australian, Netherlands KIX code, Royal Mail 4 State Customer, UPU ICS 4 State Postal, USPS 4CB, TL C-39, Aztec (Standard, Inverse), MaxiCode, DataMatrix/ECC 200 (Standard, Inverse), QR Code (Standard, Inverse and Micro)
Tilt reading angle	-360 - 360 °
Input voltage	5 V
Bluetooth	Yes
Dimensions (WxDxH)	69 x 97 x 185 mm
Certification	FCC, RoHS
Product color	Black
International Protection (IP) code	IP43
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Cables included	USB

Weight and Dimensions

Weight	238 g