EasyManuals Logo
Home>Zebra>Handhelds>WT6000

Zebra WT6000 User Manual

Zebra WT6000
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
128
Maintenance and
Troubleshooting
Introduction
This chapter includes instructions on cleaning and storing the WT6000, battery maintenance and provides
troubleshooting solutions for potential problems during WT6000 operations.
Maintaining the WT6000
For trouble-free service, observe the following tips when using the WT6000:
Protect the WT6000 from temperature extremes.
Do not store or use the WT6000 in any location that is extremely dusty, damp, or wet.
If the surface of the WT6000 screen becomes soiled, clean it with a soft cloth moistened with a diluted
window-cleaning solution. Do not use bleach, ammonia or hydrogen peroxide products.
Take care not to scratch the screen of the WT6000.
The display of the WT6000 contains glass. Take care not to drop the WT6000 or subject it to strong
impact.
Battery Safety Guidelines
The area in which the WT6000 units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non-commercial environment.
Do not use incompatible batteries and chargers. If you have any questions about the compatibility of a
battery or a charger, contact Zebra Support. See Service Information on page 11 for contact information.
Do not crush, puncture, or place a high degree of pressure on the battery.
Follow battery usage, storage, and charging guidelines.
Improper battery use may result in a fire, explosion, or other hazard.
To charge the mobile device battery, the battery and charger temperatures must be between +32°F and
+104°F (0°C and +40°C)
Do not disassemble or open, crush, bend or deform, puncture, or shred.
Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

Table of Contents

Other manuals for Zebra WT6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra WT6000 and is the answer not in the manual?

Zebra WT6000 Specifications

General IconGeneral
Display diagonal3.2 \
Display brightness400 cd/m²
Display resolution800 x 480 pixels
Gorilla Glass versionGorilla Glass 3
Display number of colors16.78 million colors
Flash memory8 GB
Internal memory2 GB
Internal memory type-
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Number of cores4
Processor frequency1 GHz
Battery capacity3350 mAh
GPS (satellite)No
Operating system installedAndroid
Product colorBlack
International Protection (IP) codeIP65
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version4.1
Operating frequency2412 - 2472, 5180 - 5835 MHz
Security algorithmsEAP-FAST, EAP-TLS, EAP-TTLS, LEAP, MSCHAPv2, WEP, WPA-TKIP, WPA2-AES, WPA2-TKIP
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth34 mm
Width121 mm
Height89 mm
Weight245 g

Related product manuals