ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
338 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 382 IP IGMP QUERY INTERVAL COMMAND
Command
Format
Command
Mode
Command Function
ip igmp
query-
interval
<seconds>
Interface config
This configures the IGMP
query time interval
Result: This configures the IGMP query time interval.
2. To configure the maximum response time value carried by
query messages when they are sent by the IGMP, use ip
igmp query-max-response-time <seconds> command in
interface configuration mode as shown in
Table 383.
TABLE 383 IP IGMP QUERY-MAX COMMAND
Command
Format
Command
Mode
Command Function
ip igmp
query-
interval
<seconds>
Interface config
This configures the maximum
response time value carried by
query messages when they
are sent by the IGMP
Result: This configures the maximum response time value
carried by query messages when they are sent by the IGMP.
3. To configure the timeout length of the IGMP querier, use ip
igmp querier-timeout <seconds> command in interface
configuration mode as shown in
Table 384.
TABLE 384 IP IGMP-QUERIER COMMAND
Command
Format
Command
Mode
Command Function
ip igmp
querier-
timeout
<seconds>
Interface config
This configures the timeout of
the IGMP querier. This timer is
related to the frequency of the
re-elected for querier in a
network.
Result: This configures the timeout of the IGMP querier. This
timer is related to the frequency of the re-elected for querier
in a network.
4. To configure the query interval of a specific IGMP group, use
ip igmp last-member-query-interval <seconds>
command in interface configuration mode as shown in
Table
385.
TABLE 385 IP-IGMP LAST MEMBER COMMAND
Command
Format
Command
Mode
Command Function
ip igmp
querier-
Interface config
This configures the query
interval of a specific IGMP
To Next Page
Loading...
Need help?
General
