ABB ACS150 series User Manual

92
Actual signals and parameters
DI1
DI2
DI3
Operation
0
0
0
No constant speed
1
0
0
Speed defined by parameter 1202 CONST SPEED 1
0
1
0
Speed defined by parameter 1203 CONST SPEED 2
1
1
0
Speed defined by parameter 1204 CONST SPEED 3
0
0
1
Speed defined by parameter 1205 CONST SPEED 4
1
0
1
Speed defined by parameter 1206 CONST SPEED 5
0
1
1
Speed defined by parameter 1207 CONST SPEED 6
1
1
1
Speed defined by parameter 1208 CONST SPEED 7
Parameters in the Long parameter mode
Index
Name/Selection
Description
Def
12 CONSTANT SPEEDS
Constant speed selection and values.
It is possible to define seven positive constant speeds. Constant speeds are
selected with digital inputs. Constant speed activation overrides the external
speed reference. Constant speed selections are ignored if drive is in the local
control mode.
1201 CONST SPEED SEL
Selects the constant speed activation signal.
9 = DI3,4
0 = NOT SEL
No constant speed in use
1 = DI1
Speed defined by parameter 1202 CONST SPEED 1 is activated through
digital input DI1. 1 = active, 0 = inactive.
2 = DI2
Speed defined by parameter 1202 CONST SPEED 1 is activated through
digital input DI2. 1 = active, 0 = inactive.
3 = DI3
Speed defined by parameter 1202 CONST SPEED 1 is activated through
digital input DI3. 1 = active, 0 = inactive.
4 = DI4
Speed defined by parameter 1202 CONST SPEED 1 is activated through
digital input DI4. 1 = active, 0 = inactive.
5 = DI5
Speed defined by parameter 1202 CONST SPEED 1 is activated through
digital input DI5. 1 = active, 0 = inactive.
7 = DI1,2
Constant speed selection through digital inputs DI1 and DI2.1 = DI active,
0 = DI inactive.
DI1
DI2
Operation
0
0
No constant speed
1
0
Speed defined by parameter 1202 CONST SPEED 1
0
1
Speed defined by parameter 1203 CONST SPEED 2
1
1
Speed defined by parameter 1204 CONST SPEED 3
8 = DI2,3
See selection DI1,2.
9 = DI3,4
See selection DI1,2.
10 = DI4,5
See selection DI1,2.
12 = DI1,2,3
Constant speed selection through digital inputs DI1, DI2 and DI3.
1 = DI active, 0 = DI inactive.
13 = DI3,4,5
See selection DI1,2,3.
-1 = DI1(INV)
Speed defined by parameter 1202 CONST SPEED 1 is activated through
inverted digital input DI1. 0 = active, 1 = inactive.
-2 = DI2(INV)
Speed defined by parameter 1202 CONST SPEED 1 is activated through
inverted digital input DI2. 0 = active, 1 = inactive.
-3 = DI3(INV)
Speed defined by parameter 1202 CONST SPEED 1 is activated through
inverted digital input DI3. 0 = active, 1 = inactive.
-4 = DI4(INV)
Speed defined by parameter 1202 CONST SPEED 1 is activated through
inverted digital input DI4. 0 = active, 1 = inactive.

ABB ACS150 series Specifications

General

Brand	ABB
Model	ACS150 series
Category	Controller
Language	English