Troubleshooting
8 - 14 Modules
8
Modules
Problem Possible Cause - Solution
The Wireless LAN/
Bluetooth/ modules
cannot be detected.
The modules are off. Check the LED indicator to see if the modules are on or off
(see “LED Indicators” on page 1 - 6). If the LED indicator is off, then press the
appropriate AP-Key button in order to enable the modules (see Table 1 - 3 “- AP-Key
Buttons” on page 1 - 7
The Wireless LAN/
Bluetooth/ modules
cannot be configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the
driver for the appropriate module (see the instructions in Chapter 7 “Modules” for the
appropriate module).
The PC Camera software
displays a black screen
when the BisonCap
software is run.
If you have both the optional PC Camera and TV Tuner modules present, go to the Devices
menu in the BisonCap program and select the BisonCam USB2.0 device (see “PC Cam-
era & TV Tuner” on page 7 - 12).
To Next Page
Loading...
Need help?
General
