14 Rockwell Automation Publication 442L-UM005B-EN-P - April 2017
Chapter 1 Safety
• Qualified safety personnel or specially qualified and authorized
personnel must conduct the tests and must record and document the
test to allow for tests to be reconstructed and retraced at any time.
• The user manual must be made available to the operator of the machine
where the SafeZone Mini device is used. The machine operator is to be
instructed in the use of the device by qualified safety personnel and must
be instructed to read the operating instructions.
• To meet the requirements of the relevant product standards (for
example, EN 61496-1), the external voltage supply for the devices must
be able to bridge a brief mains failure of 20 ms. Power supplies according
to EN 60204-1 satisfy this requirement. Suitable power supplies are
available as accessories from Rockwell Automation.
Environmental Protection
The SafeZone Mini device is constructed in such a way that it adversely affects
the environment as little as possible and uses only a minimum of power and
natural resources.
Disposal
Unusable or irreparable devices must be disposed of per the applicable national
regulations on waste disposal (for example, European waste code 16 02 14).
Separation of Materials
Before you send the devices for appropriate recycling, it is necessary to separate
the different materials in the SafeZone Mini device.
• Separate the housing from the rest of the parts (in particular the
circuit boards).
• Send the separated parts for recycling as appropriate (see Tabl e 1
).
TIP Enclosed with these operating instructions is a checklist for checking by the
manufacturer and OEM (see Checklist to Install Electro-sensitive Protective
Equipment (ESPE) on page 97). Use this checklist when checking the system
that the SafeZone Mini device helps to protect.
TIP At work, always act in an environmentally responsible manner.
TIP Information on the individual materials in the SafeZone Mini device is given
in Table 18 on page 87
.
ATTENTION: Only qualified safety personnel are allowed to separate
materials. Caution is required when devices are dismantled. There is a risk of
injuries.