FUEL SYSTEM
RS 125
4.3. CARBURETOR
4.3.1. CARBURETOR REMOVAL
Read
1.2.1 and 1.3.1 carefully.
• Remove the airbox.
• Slacken the clip (1).
• Ease the carburetor (2) off the intake manifold.
• Block off the intake manifold with a cloth to prevent the
ingress of debris into the engine.
• Release and remove the two screws (3).
• Remove the throttle cable complete with needle and
slide.
• Release and remove the screw (4) and remove the
complete throttle cable.
• Remove the hose (5) of the mixer oil pump.
NOTE Place some paper underneath the hose (5) to collect
any oil spillage.
4 - 8