ROUTINE MAINTENANCE
RS 125
2.3.2. INSTRUMENTS AND INDICATORS TABLE
Description Function
Direction indicator warning light
(
)
Blinks when the direction indicators are on.
High beam warning light ( ) Comes on when the front high beam bulb is on or when the passing is operated.
Revolution counter (rpm) Indicates the number of revolutions of the engine per minute.
WARNING
Never exceed the engine max. speed rate, see
1.4.1.
Side stand down warning light
(
)
Comes on when the side stand is down.
Low mixer oil LED warning light
(
)
Comes on when the quantity of mixer oil is about 0.35 l.
WARNING
If the LED light comes on, the mixer oil is in reserve. In this case,
top up as soon as possible.
Neutral indicator warning light
(
)
Comes on when the gear is in neutral.
Trip meter Indicates the partial number of kilometres covered. Reset it using the special knob.
Trip meter resetting knob. To reset the partial number of kilometers, turn it counter-clockwise.
Total kilometers odometer Indicates the total number of kilometers covered.
Speedometer (km/h) Indicates the driving speed
Coolant
temperature (°C)
( )
It displays the temperature of the coolant in the engine, see
2.3.1.
If a temperature of 115°C - 130°C is displayed, stop the engine
and check the coolant level, see 2.10.1.
WARNING
If the maximum allowed temperature (130°C), is
exceeded, the engine may be seriously
damaged.
If the writing “LLL” is displayed, check the coolant thermistor
and/or electrical connection circuit.
Clock Indicates the hour and minutes according to the pre-setting,
see 2.3.1.
Battery voltage
(V BAT)
Indicates the battery voltage, see
2.3.1.
Multifunction
digital display
Chronometer Indicates the various timings according to the pre-setting, see
2.3.1.
To alternate
displays, see
2.3.1.
2 - 10
To Next Page
Loading...
Need help?
General
