FUEL SYSTEM
RS 125
4.2.2. AIR CLEANER REMOVAL
TORQUE WRENCH SETTINGS
Screws (1) 5 Nm (0.5 Kgm).
Screws (2) 5 Nm (0.5 Kgm).
• Lift the fuel tank; see 2.9.1.
• Release and remove the two screws (1).
• Release and remove the two screws (2) and collect the
nuts from beneath the screws.
• Remove the airbox cover (3).
• Remove the air cleaner (4) together with its meshing.
NOTE Block off the opening with a clean cloth to prevent the
ingress of debris into the intake ducts.
On refitting, be sure to remove the cloth and any other
objects you may have placed inside the airbox before
positioning the airbox cover (3).
Make sure the air cleaner is positioned correctly, otherwise it
will let unfiltered air into the engine.
4 - 7
To Next Page
Loading...
Need help?
General
