FUEL SYSTEM
RS 125
4.2. AIR CLEANER
4.2.1. AIRBOX REMOVAL
TORQUE WRENCH SETTINGS
Screws (1) 5 Nm (0.5 Kgm).
Screws (2) 5 Nm (0.5 Kgm).
• Remove the fuel tank; see 4.1.1.
• Release and remove the two screws (1).
• Release and remove the two screws (2) and collect the
nuts from beneath the screws.
• Remove the airbox cover (3).
• Slacken the clip (4).
• Remove the airbox complete with air cleaner.
NOTE Block off the carburetor opening with a clean cloth to
prevent the ingress of debris into the intake ducts.
4 - 6
To Next Page
Loading...
Need help?
General
