ROUTINE MAINTENANCE
RS 125
2.3.3. NUT, BOLT, SCREW TIGHTENING
Check after the first 1000 km (621 mi) and then every 4000
km (2485 mi) or 12 months.
Check all fastening parts with accuracy. Mainly check all
safety-related components and, in particular:
Handlebar-to-upper plate fastener;
Front brake control lever;
Clutch control lever;
Fuel delivery line;
Plate-to-front fork fastener;
Front wheel shaft fork clamps;
Front wheel;
Front brake line couplings;
Front brake disc;
Front brake caliper;
Engine;
Sprocket;
Rear brake control lever;
Rear swingarm;
Rear swingarm levers;
Rear shock absorber;
Rear wheel;
Rear brake disc;
Rear brake caliper;
Rear brake line couplings.
WARNING
The fastening elements shall be tightened to
the specified torque value. Apply LOCTITE
ONLY where indicated, see
2.3.4.
Lubricate only the parts specified in the table
2.3.4.
2 - 11
To Next Page
Loading...
Need help?
General
