GENERAL INFORMATION
RS 125
1.7.2. POSITIONING THE VEHICLE ON THE REAR
SERVICE STAND (OPT)
• Screw and tighten the pin (1) into its proper location on
the rear swingarm.
NOTE Have someone help you keep the vehicle in vertical
position with the two wheels on the ground.
• At the same time introduce the two seats on the stand
(2) into the two pins (1) on the vehicle.
1
2
• Rest one foot on the rear part of the stand.
• Push the stand downwards until it reaches the end of
its stroke.
1 - 20
To Next Page
Loading...
Need help?
General
