APRILIA RS 125 User Manual

CHASSIS
7 - 75
RS 125
NOTE Ensure that the right-hand (4) and left -hand (5)
tensioners do not get mixed up. Refit each tensioner in its
original position.
• Locate the right-hand chain tensioner (4) and the left-
hand chain tensioner (5) to the swinging arm at the
correct positions.
• Smear a light coat of grease evenly on the wheel
spindle (6).
• Push the wheel spindle (6) fully home from the left
side.
NOTE Make sure the wheel spindle (6) is fully in with the
head fully seated into the left-hand chain tensioner (5).
5
6
• Fit the washer and screw the nut (7) hand tight.
• Check chain slack; see
2.21.1.
• Tighten the nut (7).
WARNING
After reassembling, operate the rear brake lever
repeatedly and check for proper operation of
the brake.
Ensure that the wheel is perfectly centred.
7
4

APRILIA RS 125 Specifications

General

Displacement	124.8 cc
Transmission	6-speed
Front Suspension	Upside-down fork
Rear Suspension	Monoshock
Front Brake	Single disc
Rear Brake	Single disc
Dry Weight	114 kg
Fuel System	Carburetor
Frame	Aluminum perimeter frame
Engine Type	Single cylinder, 2-stroke