1508685 Rev D CHP Max Element Management Modules CHP-CMM, CMM-1, SMM, and SMM-1 6-33
Figure 6.22
Firmware Download
Method 2
9. Navigate through the Open dialog box to where the firmware file (.hex extension) for
the module is located.
10. Select the first firmware file listed in Table 6.5 on page 6-30 to download and click
Open to initiate the download. Click OK to confirm that you want to start
downloading the firmware.
11. If either an SMM-1 or CMM-1 module is installed in the chassis, after the firmware is
downloaded into the required module(s) click the On radio button in the Autoconfig
window to enable the auto-configuration mode.
Note If you encounter a problem downloading the firmware, ensure that the
CMM-1 or SMM-1 module is fully inserted into the chassis. If the problem still exists,
replace the CMM-1 or SMM-1 with a spare module to verify if the originally installed
CMM-1 or SMM-1 is working properly.
To Next Page
Loading...
Need help?
General
