Arris CHP Max5000 User Manual

4-6 CHP Max™ Headend Optics Platform Chassis, Controllers and Power Supplies Rev D
3. Push the Power Supply module retaining tab to the right and slide the module out
the front of the chassis.
Craft Management Software Functions
After launching the CHP Max Craft Management Software, click on the Disconnected button or
click Communication > Connect and then double-click on the AC power supply module you
want to monitor. The Status and Setting window of the AC power supply module is displayed
in Figure 4.4.
Figure 4.4
AC Power Supply
Status and Settings
Management
Window
Disconnected
Table 4.3 Controls and Functions of the Craft Management Software
Control Function
Internal Temperature
Configure Sets major low, minor low, minor high, and major high alarm limits.
Window resulting from right clicking
on +12 VDC, +5 VDC, Fan 1 current,
+3.3 VDC, –5 VDC, or Fan 2 current
Window resulting from right
clicking on Internal

Arris CHP Max5000 Specifications

General

Brand	Arris
Model	CHP Max5000
Category	Multi-service Platforms
Language	English