Arris CHP Max5000 - SMM-1 CLI V3 Tables Command

1508685 Rev D CHP Max Element Management Modules CHP-CMM, CMM-1, SMM, and SMM-1 6-45
■ entConfigChange
■ hmsDownloadStatus
■ coldStart
■ warmStart
■ authenticationFailure
SMM-1 CLI v3tables Command
The CLI command v3tables restores the default SNMP tables. This is command can be used
if for any reason the SNMP tables have been changed or corrupted and a user can no longer
access the SMM-1 via SNMP.
Figure 6.31 illustrates what occurs after invoking the command.
Figure 6.31
Invoking the
v3tables CLI
Command