Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 6 Daily Maintenance
110 No: 2969809547.1.2969824267 en-US
6.8 Check Emergency Stops and Work Lights
!
NOTE: Check each emergency stop button individually. The previous emergency stop
must be reset before checking the next emergency stop. The emergency stop buttons
and wires must be checked before each shift and after tramming.
Precondition
p
The engine is stopped.
n
Check function of the active drill stop (A) on the remote control.
n
Check function of the emergency stop (B) on the control panel.
n
Check function of the emergency stop (C) on the right-hand side.
n
Check function of the emergency stop (D) on the feeder.
n
Carry out a lamp test on the diesel panel (E).
n
Check function on the emergency stop (F) on the winch.
n
Check function of the work lights.
6.9 Check Coolant Level
Read first: Safety Precautions Before Performing Daily Maintenance [}105]

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English