Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 6 Daily Maintenance
117 No: 2969809547.1.2969824267 en-US
6.18 Check Winch
n
Check for damage, unwinding, wear, and corrosion on the winch cable (A).
n
Check for damage, cracks, and wear on the hook (B) and check that it is properly
mounted.
6.19 Check Remote Control
n
Make sure none of the rubber bellows on switches and levers are damaged
6.20 Check Hoses and Couplings
First read: Safety Precautions Before Working on Hydraulic System
n
Inspect all hydraulic hoses and connections thoroughly. Any cracking or swelling indi-
cates an external or internal leak. Inspect the hose location and clips.
n
Inspect the hose casing. Any swelling indicates inner hose or cord breakage.
n
Inspect the hydraulic couplings for leaks, indentations, and adapters. The couplings
must be fastened securely if they have screw flanges. If there are any signs of leaks
around connections, replace the seals or the complete coupling.
n
Check that all hose retainers and clamps are intact.
n
Inspect all pressed couplings for signs of cracks or damage to compression sleeves.
Replace any defective hoses with new ones.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English