Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 4 Operation
56 No: 2969809547.1.2969824267 en-US
4.1.3 Activating Remote Control
WARNING
Accidental Operation
Accidental operation can cause serious injury or damage property.
u The operator must have a clear line of sight when working with a remotely operated
machine.
u Before operating the machine, always check that the controls are correctly adjusted.
u Always deactivate the remote control when not in use.
u Never stand on the machine during operation.
!
NOTE: Monitor pressure gauges and display for diesel engine when in operation.
!
NOTE: Always have the drill rig and the remote control box under surveillance.
!
NOTE: If the remote control box is turned off once the system has been activated, the
diesel engine stops and deactivates the drill rig.
!
NOTE: If the buttons on the remote control are not used within 10 seconds, the remote
control goes into standby." Press touch button
to reactivate the remote control.
1.
Turn the ignition key (J) to position (3).

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English