Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 4 Operation
72 No: 2969809547.1.2969824267 en-US
4.
Set the winch pressure regulator (R106) to the desired pressure. Multifunction knob
(D).
5.
Activate the winch circuit by setting the circuit breaker (F) on the control panel to posi-
tion (1).
6.
Reverse up the incline using the tramming levers (C), and make sure that the wire is
kept taut constantly.
7.
Adjust the pressure of the winch motor to attain sufficient traction by gradually turning
the pressure regulator (R106) clockwise.
4.2.13 Tramming down Inclines
First read: Safety Precautions Before Using Winch [}69]
1.
Check that the track oscillation is deactivated
.
2.
Fasten the eyelet to the anchor point.
3.
Set the traction of the winch to max. pressure by turning the potentiometer clockwise.
Potentiometer R106.
4.
Activate the winch circuit by setting the circuit breaker (F) in position (1).

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English