Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 4 Operation
71 No: 2969809547.1.2969824267 en-US
1.
Disengage the winch drum by lifting and turning the disengagement lever (1) a quar-
ter-turn to a locked position.
2.
Pull out the wire and fasten the eye to the anchor point.
3.
Lift and turn back the engagement lever. Try turning the drum by hand to check that it
is engaged.
!
NOTE: Important to check that disengagement is fully applied before use.
4.2.12 Tramming up Inclines
First read: Safety Precautions Before Using Winch [}69]
1.
Activate the remote control.
2.
Make sure the mode switch (B) is in tramming position
.
3.
Make sure that the track oscillation lock is disabled. See Chapter: Activating remote
control.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English