Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 3 Controls and Instrument
32 No: 2969809547.1.2969824267 en-US
L Winch motor
1. Wind in
2. Neutral
3. Wind out
M Upper drill rod support
1. Open
2. Close
N Lower drill rod support
1. Open
2. Close
P Resetting hole depth
Q Suction hood/Auto positioning
1. Suction hood up (Drilling position)/ Auto positioning On (Positioning mode)
2. Suction hood down (Drilling position)/ Auto positioning Off (Positioning mode)
R Dust collector (DCT) On/Off
S Software stop, Manual extraction
1. Activate
2. Deactivate
3.5.1 Safety Precautions Before Using Remote Control
WARNING
Accidental Operation
Accidental operation can cause serious injury or damage property.
u The operator must have a clear line of sight when working with a remotely operated
machine.
u Before operating the machine, always check that the controls are correctly adjusted.
u Always deactivate the remote control when not in use.
u Never stand on the machine during operation.
WARNING
Deactivated Remote Control
Can cause serious injury.
u No functions can be controlled when the remote control is deactivated.
3.5.2 Left-Hand Multi-function Lever
First read: Safety Precautions Before Using Remote Control [}32]

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English