Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 4 Operation
65 No: 2969809547.1.2969824267 en-US
1.
Loosen the radiator cap (A) to the stop position, release the pressure in the cooling
system and only then remove the cap.
2.
Add coolant until the level is between the upper and the lower mark (B).
Coolant
Caterpillar coolant ELC205
4.2.3 Basic Tramming
Read first:Safety Precautions Before Tramming [}61]
!
NOTE: All emergency stop buttons and the emergency stop wire must be checked af-
ter all tramming (see the chapter Daily maintenance).
!
NOTE: The gradient meter shows the chassis frame inclination and not the actual
ground inclination.
1.
Set the remote control in tramming mode
by turning mode switch (B), position
(3).

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English