FlexiROC T30 R 4 Operation
87 No: 2969809547.1.2969824267 en-US
9.
Switch up to high feed pressure and percussion pressure. Right multi-function lever
through sector (D.F.L).
10.
Cease drilling by:
a.
Turning the right multi-function lever (E) counterclockwise when in low percus-
sion, flush air on.
b.
Turning the right multi-function lever clockwise when in high percussion, flush air
on.
4.4.10 Loosening Manually
WARNING
Accidental Operation
Accidental operation can cause serious injury or damage property.
u The operator must have a clear line of sight when working with a remotely operated
machine.
u Before operating the machine, always check that the controls are correctly adjusted.
u Always deactivate the remote control when not in use.
u Never stand on the machine during operation.
1.
Deactivate self-holding for feed and rotation with touch button
on the remote con-
trol box.
2.
Feed can now be controlled manually using the right multi-function lever (E) in sectors
(A) and (C).
3.
Leave percussion active until all the drill rod couplings and couplings are loose.
4.
Hold the touch button
pushed to be able to operate rotation manually with the
right multi-function lever (E).
5.
Deactivate percussion by pressing the touch button
once again.
To Next Page
Loading...
Need help?
General
