Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 8 Options
137 No: 2969809547.1.2969824267 en-US
8.5 Directional Instrument
A Drill aim device
B Sensors
To control drilling length and penetration rate, the system is equipped with a drilled length
sensor. This is installed on the upper sheave and is connected to the display together with
other components in the system.
The drilled length instrument can be configured to show either the actual drilled length,
hole length measurement, or the vertical depth, vertical depth measurement. In the latter
case, the instrument takes into account the hole inclination, and the value that is displayed
is therefore less than the actual drilled length.
8.5.1 Changing Hole Length, Hole Depth, and Laser Setting
1.
Open the Settings menu in the operator panel.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English