Atlas Copco FlexiROC T30 R User Manual

FlexiROC T30 R 4 Operation
85 No: 2969809547.1.2969824267 en-US
!
NOTE: After 5 seconds, the positioning functions will be deactivated and only percus-
sion stop will work. To resume drilling, reset the mode switch to drilling position or
press the multifunction knob (D).
4.4.9 Drilling Automatically
1.
Set the mode switch (B) in drilling position
.
2.
Check that the dust collector is activated. When flushing air is activated later, the dust
collector suction starts. Switch (R) position (1).
3.
Load the compressor. Button
on the diesel panel.

Atlas Copco FlexiROC T30 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T30 R
Category	Construction Equipment
Language	English