EasyManuals Logo
Home>AudioCodes>Gateway>Mediant 800C SBC

AudioCodes Mediant 800C SBC User Manual

AudioCodes Mediant 800C SBC
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Mediant 800C with ZPLS
- 22 -
7 Configuring AudioCodes Mediant 800C SBC
This section shows how to configure AudioCodes SBC for interworking between the Zoom Phone
Local Survivability, the Zoom Phone Cloud system and the Generic SIP Trunk. These configuration
procedures are based on the typical deployment topology described in Section 2.1, and includes the
following main areas:
SBC LAN interface: Zoom Phone Local Survivability Module and Management Station.
SBC WAN interface: Generic SIP Trunking and the Zoom Phone Cloud system environment.
This configuration is done using the SBC's embedded Web server (hereafter, referred to as Web
interface).
7.1 Validating AudioCodes SBC License and Version
Zoom has successfully conducted validation tests with AudioCodes' Mediant SBC Ver. 7.40A.250. The
previous certified firmware version is 7.20A.258.
For interconnection between the Zoom Phone Local Survivability Module, the Zoom
Phone Cloud system, and Generic SIP Trunk based on the configuration described in
this section, AudioCodes SBC must be installed with a License Key that includes the
following software features:
Number of SBC sessions [Based on requirements]
DSP Channels [If media transcoding is needed]
Transcoding sessions [If media transcoding is needed]
Coders [Based on requirements]
For more information about the License Key, contact your AudioCodes sales
representative.
If your SBC is deployed in a virtual environment and transcoding is required, your
virtual machine must have a minimum of two vCPUs. For more information, please
refer to the appropriate Installation Manual, which can be found on AudioCodes
website.
The scope of this document does not cover all security aspects for configuring this
topology. Comprehensive security measures should be implemented per your
organization's security policies. For security recommendations on AudioCodes’
products, refer to the Recommended Security Guidelines document, which can be
found at AudioCodes website.
7.2 Prerequisites
Before you begin configuration, make sure you have obtained the following for each SBC you wish
to pair with Zoom Phone Systems:
Public IP address
Public certificate that is issued by one of the Zoom supported CAs

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant 800C SBC and is the answer not in the manual?

AudioCodes Mediant 800C SBC Specifications

General IconGeneral
BrandAudioCodes
ModelMediant 800C SBC
CategoryGateway
LanguageEnglish

Related product manuals