AudioCodes Mediant 800C SBC User Manual

7. Configuring AudioCodes Mediant 800C SBC
Mediant 800C with ZPLS
- 38 -
3. Configure an IP Group for the Zoom Phone Cloud system:
Parameter
Value
Index
2
Name
Zoom Cloud (arbitrary descriptive name)
Type
Server
Proxy Set
Zoom Cloud
IP Profile
Zoom
Media Realm
MR-Zoom
SIP Group Name
(According to requirement)
SBC Alternative Routing Reason Set
Alt. Route Reasons
(created in section 7.10)
Proxy Keep-Alive using IP Group settings
Enable
All other parameters can be left unchanged with their default values.
4. Configure an IP Group for the SIP Trunk:
Parameter
Value
Index
3
Name
SIPTrunk (arbitrary descriptive name)
Type
Server
Proxy Set
SIPTrunk
IP Profile
SIPTrunk
Media Realm
MR-SIPTrunk
SIP Group Name
(According to ITSP requirement)
All other parameters can be left unchanged with their default values.
On Hybrid SBCs (with onboard PSTN interfaces) it’s recommended to leave IP Group 0
unconfigured for possible future use for PSTN Fallback.
7.12 Configuring SRTP
This section describes configuring media security. This section describes how to configure media
security. The Zoom Phone System Interface needs to use SRTP only, so you need to configure the
SBC to operate in the same manner. By default, SRTP is disabled.
To configure media security:
1. Open the Media Security page (Setup menu > Signaling & Media tab > Media folder > Media
Security).
2. From the 'Media Security' drop-down list, select Enable to enable SRTP.
3. Click Apply.

AudioCodes Mediant 800C SBC Specifications

General

Brand	AudioCodes
Model	Mediant 800C SBC
Category	Gateway
Language	English