Barco DP2K-C Series Service Manual

9. Convergence
9.3 Red on Blue convergence
This proce dure can only be executed when all preparations are taken to co nverge the image.
Necessary tools
No tools.
How to converge
1. Slightly turn the red c olored control knob number 1 until the r ed pattern in the center of the projected image converges with the
blue pattern. Note that a turn of a few degrees c orresponds w ith one full pixel.
Note: When start turning the knob, a little resistance can be felt. T his resistance is part of the internal locking mechanism of
the adjustment.
1
Image 9-5
Clockwise turning will move line downwards.
2. Slightly turn the red colored control k nob number 2 until the re d pattern in the lower left of the pr ojected im age converges with
the blue pattern.
2
5
Image 9-6
Clockwise turning will move line upwards.
3. Slightly turn the red colored control kn ob number 3 until the r ed pattern in the upper right of the projected ima ge converges with
the blue pattern.
R5905043 DP2K-12C/11CX 19/02/2018
163

Barco DP2K-C Series Specifications

General

Brand	Barco
Model	DP2K-C Series
Category	Projector
Language	English