9. Convergence
9.1 Convergence c ontrols
Extended control k nobs
As the DMD of the blue channel is not accessible in the pr ojector, the image of this DMD will be taken as reference. R ed an d gr een
will be aligned on blue when a small convergence drift is recognized. S o, the DMD of the blue channel is fixed and can not be
adjusted. The red and green channel is equipped with three extended control knobs for convergence adjustment. The adjustment
knobs are numbered from 1 to 6 and have the sam e color as the c hannel which they effect (1, 2 and 3 for red and 4, 5 and 6 for
green).
Image 9-1
Convergence knobs
1 Red channel, knob num ber 1
2 Red channel, knob num ber 2
3 Red channel, knob num ber 3
4 Green channel, knob number 4
5 Green channel, knob number 5
6 Green channel, knob number 6
160 R5905043 DP2K-12C/11CX 19/02/2018
To Next Page
Loading...
Need help?
General
