Bosch Intellic EFAS-4.10 User Manual

78
Workshop Manual
Smart Tachograph EFAS-4.10/4.11
 26/04/2020 15:25 (UTC)
-----------------------
SrvId
------------------------
25/04/2020 - 26/04/2020
------------------------
 26/04/2020 10:34
31 S41 00h01
--------------------
########################
 26/04/2020 10:33
########################
--------------------
! 26/04/2020 10:32
31 S41 00h02
--------------------
! 26/04/2020 10:04
!11 S124 --h--
--------------------
! 26/04/2020 09:02
!03 S10 --h--
...
-----------------------
SrvId: 
S10  (1)
S41  (2)
S124  (1)
...
Printout type
If a printout period has been dened, it is printed here.
Pictogram; start time of event/fault.
EFT (hex); SrvId; Duration
Marker for last SrvId printout. If no time stamp is known, no marker is printed.
SrvId S41 was detected for 2 minutes.
SrvId S124 is still active (--h--)
Total SrvIds within the print period and in the archive
12.5 Support during installation and operation of the tachograph
With the help of the EFAS Service Tool, a support le can be created from the tachograph via the function Create Support-File….
This le helps the Intellic support team to solve your problem eciently.
To create this support le, please proceed as follows:
1. Start EFAS Service Tool on your PC and connect it to the EFAS.
2. Press the F5 function key or select the Create Support File... function from the Tools menu.
3. In the PIN dialog box, enter the PIN received from the intellic support team and choose OK.
4. If the creation of the support le was successfully completed, the corresponding folder can be opened or displayed via
the active button Open Output Folder in Explorer …
5. Send the ZIP le created in the output folder to the intellic support team.
The ZIP le is created in the format {VRN name}_support_le.ZIP.

Bosch Intellic EFAS-4.10 Specifications

General

Brand	Bosch
Model	Intellic EFAS-4.10
Category	Measuring Instruments
Language	English