HL-2030/2040/2070N SERVICE MANUAL
Confidential
2-3
2. UNPACKING
When unpacking the printer, check to see that all of the following components are included in
the carton.
Fig. 2-1
NOTE:
Components may vary depending on the country.
Interface cable
An interface cable is not a standard accessory. Please purchase the appropriate cable for the
interface you are going to use (Parallel, USB or Network).
■ Parallel cable (For HL-2040 and HL-2070N)
Most parallel cables support bi-directional communication, but some might have an
incompatible pin assignment or may not be IEEE 1284-compliant. (The Parallel cable is not
available for HL-2030.) Do not use a Parallel interface cable that is longer than 6 feet (2
meters).
■ USB cable (For Windows
98/Me/2000/XP, Mac OS
9.1–9.2/ Mac OS
X 10.2.4 or greater
users only)
Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses a Hi-
Speed USB 2.0 interface.
Do not connect the USB cable to a non-powered hub or a Mac
keyboard. Please make sure
that you connect a USB cable to the USB connector of your PC when you use it.
It is recommended to use a USB interface cable that is no longer than 2 meters (6 feet).
■ Network cable (For HL-2070N)
Please use a straight-through Category5 (or greater) twist-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Printer
Drum Unit Assembly
(including Toner Cartridge)
Quick Setup Guide
CD-ROM
To Next Page
Loading...
Need help?
General
