EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
GE, Mitsubishi, Omron, Modicon and Siemens PLCs
Panel Powered via external power supply, Port1 or Port2 Communications
PLC Compatibility & Connection Chart
PLC
C-more
Micro-Graphic Panel
Family CPU
PLC Port &
Type
Panel to PLC Cabling Components Required for
Specific Port and Protocol being used.
External DC Power Supply
Powered from an external 24 VDC source.
Using panel’s RJ12 Port1
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Supported
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
GE
90/30, 90/70
15-pin
D-sub port
Not Possible
SNPX
EA-90-30-CBL
RS-422
Micro 90,
VersaMax
Micro
RJ45
Port 1
** See Diagram
12
RS-232
15-pin
D-sub port
Port 2
EA-90-30-CBL
RS-422
Mitsubishi
Melsec
FX Series
25-pin
D-sub port
CPU Direct
EA-MITSU-CBL
RS-422
8-pin
mini-din port
EA-MITSU-CBL-1
RS-422
Q / QnA
9-pin
D-sub port
Q / QnA
** See Diagram
14
RS-232C
6-pin
mini-din port
** See Diagram
15
RS-232C
Omron
C200
(Adapter),
C500
25-pin
D-sub port
Host Link
EA-OMRON-CBL
RS-232
CJ1, CS1,
CQM1,
CPM1,
CPM2
C200 CPU
9-pin
D-sub port
Host Link
FINS
** See Diagram
7 & 8
RS-232
Modicon
984 CPU,
Quantum
113 CPU,
AEG
Modicon
Micro Series
110 CPU
varies Modbus RTU
** See Diagram
9, 10 & 11
RS-232
Siemens
S7-200
CPU
9-pin
D-sub port
0 or 1
PPI
** See Diagram
13
RS-485
** Note: Wiring Diagrams for user constructed cables start on page 6-26.