C-more micro EA1-S6ML - Directlogic Dl205 Plcs, D2-DCM Module and Winplc

6–10
Chapter 6: PLC Communications
6
®
EA1-MG6-USER-M Hardware User Manual, 1st Ed. Rev C, 09/10
DirectLOGIC DL205 PLCs, D2-DCM Module and WINPLC
Panel Powered via external power supply, Port1 or Port2 Communications
PLC Compatibility & Connection Chart
PLC C-more Micro-Graphic Panel
Family CPU
PLC Port &
Type
Panel to PLC Cabling Components Required for
Specific Port and Protocol being used.
*PLC Port Powered
or
External DC Power Supply
External DC Power Supply
Using panel’s RJ12 Port1
Using panel’s Port2
DB 15-pin - female
Protocol(s)
Supported
Components &
Network Type
Protocol(s)
Supported
Components &
Network Type
Direct LOGIC
DL205
D2-230
Port 1
RJ12 - 6 pin
K-sequence
DV-1000CBL*
RS-232
K-sequence
EA-2CBL
RS-232
D2-240
Port 1
RJ12 - 6 pin
K-sequence
DV-1000CBL*
RS-232
K-sequence
EA-2CBL
RS-232
Port 2
RJ12 - 6 pin
K-sequence,
Direct
NET
K-sequence,
Direct
NET
D2-250-1
Port 1
RJ12 - 6 pin
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL*
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
Port 2
DB15HD
(female)
DV-1000CBL*
+ FA-15HD
RS-232
EA-2CBL-1
RS-232
** See Diagram 1
RS-422
D2-260
Port 1
RJ12 - 6 pin
K-sequence,
Direct NET,
Modbus RTU
DV-1000CBL*
RS-232
K-sequence,
Direct NET,
Modbus RTU
EA-2CBL
RS-232
Port 2
DB15HD
(female)
DV-1000CBL*
+ FA-15HD
RS-232
EA-2CBL-1
RS-232
** See Diagram 1
RS-422
Modbus RTU
** See Diagram 2
RS-485
Modbus only
D2-DCM
Port 1
DB 25 pin
(female)
K-sequence,
Direct NET,
Modbus RTU
** See Diagram 3
RS-232
Direct
NET
EA-4CBL-2
RS-232
** See Diagram 6
RS-422
WINPLC
Port 1
RJ12 - 6 pin
Modbus RTU
DV-1000CBL*
RS-232
Modbus RTU
EA-2CBL
RS-232
* Note: The PLC can provide 5 VDC through this cable. No external 12-24 VDC souce is required, however, screen
brightness is diminished and the alarm beep will not function.
** Note: Wiring Diagrams for user constructed cables start on page 6-26.