Canon HG10 User Manual

I~
Problem SOlution
OJ
l] appears in red. A memory card error occurred. Turn off the camcorder. Remove and 76
reinsert the memory card and set the camcorder back to ICAMI'RA· Q )
mode. If l] still appears in red, initialize the memory card.
Memory card is full. Erase still images to free some space or replace the 69
memory card.
Printing
Problem
The printer is not operating even
though the camcorder and printer are
correctly connected.
Others
Problem
A rattling can be heard from the
camcorder.
List of Messages
SOlution
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to (PlAy· Q) mode
and restore the connection.
Solution
The internal lens fixture can move when the camcorder is turned off. This
is not a malfunction.
OJ
OJ
Message Explanation
OJ
CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack.
21
CANNOT ENTER THE
The camcorder cannot enter the standby mode if the remaining battery charge 35
@l STANDBY MODE NOW is too low.
TEMPERATURE TOO HIGH The camcorder has exceeded its operational temperature. Disconnect the -
TURN OFF THE POWER AND WAIT
compact power adapter and remove the battery pack. Let the camcorder cool
down before resuming use.
TEMPERATURE TOO LOW
The camcorder's temperature is too low. Keep the power on until the IliiJ -
KEEP POWER ON AND WAIT
icon disappears.
TEMPERATURE TOO LOW
The outside temperature is too low and the camcorder will not operate. Move -
USE iN A WARM LOCATION
to a location between 0 °C and 40°C (32 OF and 104 oF).
TEMPERATURE TOO HIGH
The camcorder has exceeded rts operational temperature. Disconnect the
-
CANNOT RECORD
compact power adapter and remove the battery pack. Let the camcorder cool
down before resuming use.
• CANNOT RECORD There is a problem with the hard disk .
-
• CANNOT PLAY BACK
This message can also appear if condensation has formed. Wait until the
103
camcorder dries completely before resuming use.
REACHED THE MAXIMUM The maximum number of scenes has been reached. Delete some recordings
41
NUMBER OF SCENES to free some space.
95
I~
Problem SOlution
OJ
l] appears in red. A memory card error occurred. Turn off the camcorder. Remove and 76
reinsert the memory card and set the camcorder back to ICAMI'RA· Q )
mode. If l] still appears in red, initialize the memory card.
Memory card is full. Erase still images to free some space or replace the 69
memory card.
Printing
Problem
The printer is not operating even
though the camcorder and printer are
correctly connected.
Others
Problem
A rattling can be heard from the
camcorder.
List of Messages
SOlution
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to (PlAy· Q) mode
and restore the connection.
Solution
The internal lens fixture can move when the camcorder is turned off. This
is not a malfunction.
OJ
OJ
Message Explanation
OJ
CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack.
21
CANNOT ENTER THE
The camcorder cannot enter the standby mode if the remaining battery charge 35
@l STANDBY MODE NOW is too low.
TEMPERATURE TOO HIGH The camcorder has exceeded its operational temperature. Disconnect the -
TURN OFF THE POWER AND WAIT
compact power adapter and remove the battery pack. Let the camcorder cool
down before resuming use.
TEMPERATURE TOO LOW
The camcorder's temperature is too low. Keep the power on until the IliiJ -
KEEP POWER ON AND WAIT
icon disappears.
TEMPERATURE TOO LOW
The outside temperature is too low and the camcorder will not operate. Move -
USE iN A WARM LOCATION
to a location between 0 °C and 40°C (32 OF and 104 oF).
TEMPERATURE TOO HIGH
The camcorder has exceeded rts operational temperature. Disconnect the
-
CANNOT RECORD
compact power adapter and remove the battery pack. Let the camcorder cool
down before resuming use.
• CANNOT RECORD There is a problem with the hard disk .
-
• CANNOT PLAY BACK
This message can also appear if condensation has formed. Wait until the
103
camcorder dries completely before resuming use.
REACHED THE MAXIMUM The maximum number of scenes has been reached. Delete some recordings
41
NUMBER OF SCENES to free some space.
95

Canon HG10 Specifications

General

Filter size	43 mm
Digital zoom	200 x
Optical zoom	10 x
Image stabilizer	Yes
Focal length range	6.1 - 61 mm
Total megapixels	2.96 MP
Optical sensor size	1/2.7 \
Viewfinder resolution	123000 pixels
Viewfinder screen size	0.27 \
Display diagonal	2.7 \
Video out	1
Still image resolution(s)	640 x 480, 1440 x 1080, 1920 x 1080, 2048 x 1536
Audio dubbing	No
Camera shutter speed	1/2 - 1/2000 s
Minimum illumination	0.2 lx
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	miniSD
Internal storage capacity	40 GB

Weight and Dimensions

Depth	75 mm
Width	81 mm
Height	129 mm
Weight	505 g