Canon imagePROGRAF iPF6300S Basic Guide No.1 User Manual

Cannot feed paper.
Cause Corrective Action
Paper could not be ad-
vanced correctly during
feeding.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
→P.1014
(See "Clearing a Jammed Sheet, Fed Manually.") →P.1018
3. Load the paper.
(See "Loading Rolls in the Printer.")
→P.784
(See "Loading Sheets in the Feed Slot.")
→P.809
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Paper could not be ad-
vanced correctly during
ejection.
1. Press the OK button.
2. Remove the paper.
(See "Clearing Jammed Roll Paper.")
→P.1014
(See "Clearing a Jammed Sheet, Fed Manually.") →P.1018
Cannot cut paper.
Cause Corrective Action
There are sheets left on the
Ejection Guide.
1. Press the OK button and remove the paper.
2. Load paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
→P.784
There is a foreign object by
the Output Tray, obstructing
the Cutter Unit.
1. Lift the Top Cover and remove the foreign object.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-
play Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
You are not using the printer
under the recommended en-
vironmental conditions for
the paper.
Use the printer only where the recommended environmental conditions for the paper
are met. Note that various environmental conditions are recommended for various types
of paper. For details on the recommended environmental conditions, see the Paper Ref-
erence Guide.
(See Paper Reference Guide .)
You are using paper that is
not compatible with auto-
matic cutting.
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
→P.797
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See Paper Reference Guide .)
2. Press the OK button and remove the paper.
In other cases, the Cutter
Unit may be damaged.
Contact your Canon dealer for assistance.
Error Message > Messages regarding paper >
iPF6300S Cannot feed paper.
13
1059

Canon imagePROGRAF iPF6300S Basic Guide No.1 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.1
Category	Printer
Language	English