Spread the tips (b) of the 3-Inch Paper Core Attachment that protrude by the triangular label (a) of the Roll
Holder as shown and remove the 3-Inch Paper Core Attachment.
• Spacer for Borderless Printing
Remove the Spacer for Borderless Printing from the Roll Holder as shown.
Important
• Store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight. If paper
is not stored properly, the printing surface may become scratched, which may affect the printing quality
when you use it again.
Feeding Roll Paper Manually
After a roll has been advanced, you can press the Feed button to feed or retract the roll with the â–² and â–¼ buttons.
Handling Paper
>
Handling rolls
>
iPF6300S Feeding Roll Paper Manually
6
793
To Next Page
Loading...
Need help?
General