Ambient Light Adjust dialog box
The Ambient Light Adjust dialog box is used to select the setting method and to enter and select the information required
for the settings.
When you select By selecting a chart number in Setting Method
•
A Setting Method
You can choose configuration based on the printed Chart or based on using the i1 colorimeter.
•
B Print Chart
Click to start the Light Source Check Tool, for printing Chart. The Light Source Check Tool must be installed to
use this function.
• Light Source Check Tool →P.229
•
C Chart Number
In Chart, select the number of the pattern with your desired colors.
•
D Color Temperature
Enter the D Color Temperature measured during monitor calibration. Displayed when the A Matching Method is
set to Monitor Matching on the Matching sheet.
•
E Illuminance
Enter the E Illuminance measured during monitor calibration. Displayed when the A Matching Method is set to
Monitor Matching on the Matching sheet.
Windows Software
>
Printer Driver
>
iPF6300S Ambient Light Adjust dialog box
3
227
To Next Page
Loading...
Need help?
General