Handling rolls
Loading Rolls on the Roll Holder ..................................................................................................................... 781
Loading Rolls in the Printer ............................................................................................................................. 784
Changing the Type of Paper ........................................................................................................................... 787
Specifying the Paper Length ........................................................................................................................... 789
Removing the Roll from the Printer ................................................................................................................. 790
Removing Rolls From the Roll Holder ............................................................................................................. 792
Feeding Roll Paper Manually .......................................................................................................................... 793
Keeping Track of the Amount of Roll Paper Left ............................................................................................. 794
Specifying the Ink Drying Time for Rolls ......................................................................................................... 795
Specifying the Cutting Method for Rolls .......................................................................................................... 797
Cutting the Leading Edge of Roll Paper Automatically .................................................................................... 802
Reducing Dust from Cutting Rolls ................................................................................................................... 804
Roll Holder Set ................................................................................................................................................ 805
Removing the Roll Feed Unit .......................................................................................................................... 805
Installing the Roll Feed Unit ............................................................................................................................ 806
Loading Rolls on the Roll Holder
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with
the 2-Inch Paper Core Attachment installed.
For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll
Holder.
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper Roll Holder Side Holder Stopper Roll Holder Side
For 2-inch paper cores No Attachment Needed For 3-inch paper cores 3-Inch Paper Core Attachment
Caution
• Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll
may cause injury.
Handling Paper
>
Handling rolls
>
iPF6300S Loading Rolls on the Roll Holder
6
781