Canon imagePROGRAF iPF6300S Basic Guide No.1 User Manual

7. Click the Page Setup tab to display the Page Setup sheet.
8. Click Cut Sheet in the L Paper Source list.
9. Click Custom Size in the A Page Size list to display the Custom Size Settings dialog box.
10. Confirm that mm is selected in Units.
11. Enter 430 (16.9 in) in both Width and Height.
12. Click OK to close the Custom Size Settings dialog box.
13. Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings (Windows) →P.207 "
Printing on Non-Standard Paper Sizes (Mac OS X)
For printing on non-standard size paper, first register the paper size in the printer driver.
Call a non-standard paper size registered in the printer driver with Custom Page Sizes (Mac OS X 10.4.11-10.5)/ Custom
Paper Sizes (Mac OS X 10.6).
Once you register Custom Page Sizes / Custom Paper Sizes, you then can select it repeatedly from the paper size list.
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
This topic describes how to register a non-standard paper size by the name of 430*430and print based on the following
example.
• Document: Any Type
Enhanced Printing Options
> Printing banners or at other non-standard sizes >
iPF6300S Printing on Non-Standard Paper Sizes (Mac OS X)
2
135

Canon imagePROGRAF iPF6300S Basic Guide No.1 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.1
Category	Printer
Language	English