EasyManuals Logo
Home>Canon>Printer>imagePROGRAF iPF6300S Basic Guide No.2

Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

Canon imagePROGRAF iPF6300S Basic Guide No.2
1126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1087 background imageLoading...
Page #1087 background image
x printhead error (x is L, R, or not displayed)
Cause Corrective Action
There is a prob-
lem with the
Printhead.
Follow these steps to replace the Printhead.
1. Open the Top Cover.
2. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if
Printhead R is displayed. If neither left or right is indicated, replace both Printhead L and Print-
head R with new ones.
(See "Replacing the Printhead.") →P.982
Follow these steps to replace the Printhead.
1. Turn off the printer, wait a while, and then turn it on again.
2. Open the Top Cover.
3. Replace the left printhead with a new one if Printhead L is displayed and the right one if Print-
head R is displayed. If neither left or right is indicated, replace both printheads.
(See "Replacing the Printhead.") →P.982
No x printhead (x is L, R, or not displayed)
Cause Corrective Action
No Printhead is
installed.
Install the Printhead L if Printhead L is displayed and the Printhead R if Printhead R is dis-
played. If neither left or right is indicated, install both Printhead L and Printhead R.
(See "Replacing the Printhead.") →P.982
Execute printhead cleaning.
Cause Corrective Action
The Printhead noz-
zles are clogged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing â–² or â–¼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.981
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.") →P.982
Press â–² or â–¼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.981
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.") →P.982
Error Message
>
Messages regarding printheads
>
iPF6300S x printhead error (x is L, R, or not displayed)
13
1069

Table of Contents

Other manuals for Canon imagePROGRAF iPF6300S Basic Guide No.2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF6300S Basic Guide No.2 and is the answer not in the manual?

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General IconGeneral
BrandCanon
ModelimagePROGRAF iPF6300S Basic Guide No.2
CategoryPrinter
LanguageEnglish

Related product manuals