Canon imagePROGRAF iPF6300S Basic Guide No.2 User Manual

Roll Holder Set
Load a roll on the roll holder and then load the holder in the printer. The Roll Holder in the Roll Holder Set RH2-25 is for
use with both 2-inch and 3-inch paper cores. Use the correct attachment for the particular paper core. For borderless printing
on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder. (See "Load-
ing Rolls on the Roll Holder.")
→P.781
• Roll Holder Set RH2-25
• Roll Holder (for 2- and 3-inch paper cores)
• Attachments
Using Rolls with a 2-inch Paper Core Using Rolls with a 3-inch Paper Core
Holder Stopper (for 2-inch paper cores) Holder Stopper (for 3-inch paper cores) 3-Inch Paper Core Attachment
• Borderless Printing on A1 or A2 Rolls
Spacer for Borderless Printing
Removing the Roll Feed Unit
Important
• Always turn off the printer before removing the Roll Feed Unit. The printer may be damaged if you do not
turn it off first.
1. Remove the roll from the Roll Feed Unit. (See "Removing the Roll from the Printer.") →P.790
Handling Paper
> Handling rolls >
iPF6300S Roll Holder Set
6
805

Canon imagePROGRAF iPF6300S Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.2
Category	Printer
Language	English